Ekobord Wood

Wood Textured Fibre Cement Board

Ekobord uses EkobordWood to bring the living texture/look that it gained through its production technology to the facade. It allows you to reflect the naturalness of the wood texture to your exterior wall applications as well as the interior facades. EkobordWood also allows you to make a difference in your projects with special cuts and lines drawn at regular intervals.

EkobordWood; If desired the primer, and if also desired the primer and topcoat can be manufactured.

Sertifikalandırılmış ve Test edilmiştir.
Doğal ve kokusuz ham maddeler kullaılmıştır. Zehirli gaz emisyonu yoktur.
EN-13501-1’e göre A1 sınıfı yanmaz. Yangının sönmesine yardım eder.
Ekobord fibercement levhalar tek başına 28 Db ses yalıtımı sağlar
Product Areas
Siding Exteriors
Interior Decorative Plating
Column Facing
Wall Applications Wall Panels
Partition Walls
Prefabricated Building Walls
Applications Below The Ceiling and Roof Coatings Suspended Ceiling (8 mm poducts)
Thickness 6 mm - 18 mm (By increasing 2 mm)
Standard Production Dimensions (width) 1250 x (lenght) 2500/2800/3000 mm
Special production and cutting are performed according to the project.
Technical Specifications
Tested according to ISO quality management system of EN 12467
Material Properties Category A Category B Category D
Apparent Density (g/cm3) ~1,40 ~1,35 ~1,42
Bending Strength (N/mm2) (MPa) (in wet conditions ≥7 ≥7 -
Bending Strength (N/mm2) (MPa) (laboratory conditions) >10 >10 ≥10
Modulus of Elasticity (N/mm2) (MPa) >5500 >5000 >6000
Porosity (%) ~40
Thermal Conductivity - (W/m.K) <0,20 <0,20 <0,26
Thermal Expansion Coefficient - (mm/mK) <0,005
Tolerances Thickness Flat boards 10%, Textured boards -10% to +15%
Width/Length (mm) ±3,75 / ±5
Edge Smoothness (%) ±0,1
Compliance to EN 12467 standard
Fire Resistancy A1
Water Impermeability OK
Warm Water Test OK
Frost Resistance OK
Asbestos NT type (non-asbestos) board